VEDOS — DCP System

Fire suppression · VT/09

Salient features

• Fires that start in production machinery quickly spread to the Waste Filter Air System Machinery.
• Stones travelling in the waster Pipelines and fragments of Sediments of Soil may cause the Fire inside the Waste Air Filters.
• If the Filter machine is Damaged, As a Consequence of the same, the Customer will incur a Huge Production down time and the Total Cost will be much Higher.
• The VETAL system uses Infrared Flame Sensors to detect a small flame, activate an Automatic Fire Suppressor, trigger Alarms, and Stops the Wasteline machine and Preparatory machines through Panel Interlock Connection.
• VETAL VEDOS Dry Chemical System : The VETAL VEDOS Dry Chemical Fire Suppressing System is a stored pressure dry chemical system for use in the Wasteline Filter Systems in a Textile Mill..
• The bicarbonate based Suppressing Agent (DCP) has been found as the most efficient and cost effective fire suppressant for the very large and volatile Waste filter systems in today textile mills.
• The VETAL VEDOS system was designed to operate in harsh industrial environments and is backed by a Remote Support System.
• Key Features : Easy Installation in Primary & Secondary Filters
• Full Coverage of Filter area by the DCP through Dedicated Nozzles.
• Primary and Standby Cylinders are available for Ready to Replace Status.
• Easy to Refill on-site
• PANEL: A separate Panel is included with the System.
• DCP simulator Jig is included to Check and ensure the proper functioning of Detector, Panel, Wiring Individual Feed for Individual Zone is provided so that only the corresponding Blow Room line can be stopped without stopping the whole blow room. Fault Alarm for Open circuit & Low Voltage is given.
• Manual Call Point (MCP) Push Button is provided :- Integrated in the panel to trigger DCP in case of manual intervention needed.
• Manual Call Point - DCP Activation Delay : 0.1 to 25.0 Sec. (Factory Programmable)
• Abort Push Button is provided :- To cancel DCP quenching if users do not need.
• Abort - Cancellation Activation Delay : 0.1 to 25.0 Sec. (Factory Programmable)
• Sensors
• Fire Camera Covers the IR Spectrum range in Detecting the Fire/Flame Mounting Type is Self Mount. so it is suitable for all Areas 24VDC operations for Sensors, DCP& Panel.
• Separate LED Indication For Fire, Fault & Self Test Mode
• Individual camera is monitored and if any Cable Cut will generate fault