Phone: +91-422-4030500

VETAL – CO2 Fire Suppression system -VECOS

  • Over and above the Fire Diversion System working in almost 2000 plus spinning mills in India and abroad Vetal’s VECOS a need of the hour Solution for minimizing the losses in the process is being accepted by safety minded customers.
  • VECOS is a dedicated individual Machine / Location suppression system with CO2 automatically triggered by sensors in event of fire . Local flooding or full flooding options available.

           Download Product Brochure

Click Here

 

Automatic Spark Detection and Water jet Quenching for bales.

Fire hazard in Spinning mills is widely prevalent due to high traveling speed of cotton in the ducts. Vetal in addition to the Fire Diversion System, Metal Detection System and Cotton Contamination Cleaning machine has brought out a novel arrangement to quench the fire on the bales.

Products

BOFES improves the fire safety blanket in the spinning mill, It consists of following

  • Spark detector for the detection of spark in cotton
  • Air and water tank for storage to release high speed jet of spray water throw the Nozzles
  • Control unit for interlock, audio and visual alarm

BOFES Advantages

  • Acts as an Early warning System for fire. Since Water jet is used for Quenching, refill is easy.
  • The blow room can be put back into operation quickly.
  • In built fire extinguishing agent so dependability on other agents very less.
  • Serves as a pilot detector for other Fire Diversion System.

Download Product Brochure

Click Here

FIRE DIVERSION SYSTEM

  • The Dust & Fire Extraction Machine is a Super Fast Automatic Diverter to trap and drive out the burnt materials from the pipe lines to a water tank very quickly using the extra suction fan. Detects small fires (even spark) in the ducts and divert the fired materials to a quenching tank.
  • Available for 220 / 300 / 350 / 400 / 500/ 600 / 800 mm Dia ducts.
  • The whole Blowroom and its connective section is tripped and the particular zone of fire flashes in the panel.
  • Can be accomodated / easily in the pipe line ducts having spacing of few metres.
  • Automatic system requires little maintenance.
  • Extends coverage to BLOW ROOM, CARDING, AWES/CWES, FILTER ROOMS, COMPACTORS in Textile Spinning.
  • More than 12000 installations

Download Product Brochure

Click Here

Technology and Concept

The Laser Beam Detector is designed to form A Cross matrix of laser beams which will travel in the pallet to pallet gap. A Laser transmitter will transmit the Laser light which will travel up to the receiver which will detect smoke crossing the laser beam. The algorithm will identify the smoke based on the duration and pattern of crossing_ The smoke crossing will disturb the laser beam intersection which will identify the location of fire_ Alarm of possible smoke will be generated In case of single beam cross and In case of dual cross. smoke alarm will be Initiated.

Spark detectors detect small sparks that travel in the conveying ducts of raw material/waste material and can be trapped, diverted or suppressed with water spray as per the requirement.

Salient Features

  • Laser Beam Technology is designed to cover all the individual pallet
  • No detector is Ponied between the pallet which makes the maintenance easy
  • Since only the laser beam travels between the pallet, no damage is expected in case of fire and hence immediate recovery of Fire protection system JS possible
  • Maintenance can be done even when the warehouse is fully functional
  • Option for addressable ejectors to quench fire is possible if required

Download Product Brochure

Click Here